Paradyne 8784 - Manual (Page 21)

2. Using the Asynchronous Terminal Interface
8784-A2-GB20-30 February 2001 2-7
The current setting or value appears to the right of the field name. You can enter
information into a selected field by:
T Typing in the first letter(s) of a field value or command.
T Switching from the screen area to the function key and message area below
the dotted line, and selecting a function key.
If a field is blank and the Field Value Choices display valid selections, press the
spacebar; the first valid value for the field will appear in the field. Continue
pressing the spacebar to scroll through other valid values. Press Enter to select
the value.
If a field is blank and the Field Values screen area displays valid selections, press
the spacebar and the first valid value for the field will appear. Continue pressing
the spacebar to scroll through other valid values.
Function Keys
All screen function keys located below the dotted line operate the same way
(upper- or lowercase) throughout the screens.
For the screen
function . . .
Select . . . And press Enter to . . .
ClrFar F or f Clear far-end network statistics and refresh the screen.
ClrNear N or n Clear near-end network statistics and refresh the screen.
ClrStats S or s Clear DSX-1 statistics and refresh the screen.
Delete L or l Delete data.
Exit E or e Terminate the asynchronous terminal session.
MainMenu M or m Return to the Main Menu screen.
New N or n Enter new data.
PgDn D or d Display the next page, or group of entries.
PgUp U or u Display the previous page, or group of entries.
ResetMon R or r Reset an active Monitor 511 test counter to zero.
Save S or s Save information.