Paradyne 8784 - Manual (Page 28)

3. Initial Startup and Configuration
3-4 February 2001 8784-A2-GB20-30
Make a selection by placing the cursor at your choice and pressing Enter.
Current and Default Factory Configurations
The Configuration Edit/Display screen appears when the current or default
configuration is loaded. To access the Configuration Edit/Display screen, follow
this menu selection sequence:
Main Menu
→
Configuration
→
Current Configuration
– or –
Main Menu
→
Configuration
→
Default Factory Configuration
Load Default Factory Configuration to reset the unit’s configuration to its original
factory-set configuration to restore access to the ATI when the unit has been
misconfigured.
In the menu selection sequences contained in this manual, Current Configuration
is assumed and shown.
If you select . . . Then . . .
Current
Configuration The selected configuration option set is loaded and the
Configuration Edit/Display menu appears. This is the unit’s
currently active configuration.
Configuration
Loader The Configuration Loader screen is displayed allowing you to
upload or download configurations from a TFTP server.
Default Factory
Configuration The factory-set configuration options are loaded and the
Configuration Edit/Display menu appears. This is a read-only
configuration area.
main/config/edit Hotwire
Slot: 4 Model: 8784
CONFIGURATION EDIT/DISPLAY
Network
DSX-1
Copy Ports
System Options
Management and Communication
-------------------------------------------------------------------------------
Ctrl-a to access these functions, ESC for previous menu MainMenu Exit
Save