Planet Technology DVR-860 - Manual (Page 52)

LICENSED SOFTWARE AP
-46-
7.3.2 PTZ Camera Control Panel
a ~ k: Same as the DVR control panel a ~ k.
l. Preset 1 ~ 16 :
A preset position is a pre-defined camera view that can quickly and easily been viewed.
m. AUTO :
Press this button to enter the auto pan or sequence mode (depend on the setting in the PTZ menu). In the auto pan
mode, the Live View page will rotate through the selected preset positions, in a set order or in sequence. In the
sequence mode, the Live View page will automatically display the view from preset positions in a set order at set
intervals.
n. Zoom Tele Zoom Wide
o. Focus Near Focus Far
p. Continuously Zoom In Continuously Zoom Out
q. Enter : Press this button to confirm the settings or enter your selection.
r. Menu / Up / Down / Left / Right :
Press button to enter the PTZ menu / to confirm the selection and return the upper menu / exit the menu mode.
Press buttons to move the cursor and make the selection.
s. Turbo ON/ OFF :
To speed up menu selection or the control of the PTZ camera under software AP, users can activate TURBO function
by clicking this button. Users are allowed to change the turbo steps from 1 to 30.
Ex: If users activate TURBO function and set the value of the turbo step as 3, one mouse-click will function as clicking
3 times then when users press one of the button up/down/left/right.