Planet Technology DVR-860 - Manual (Page 12)

FRONT AND REAR PANELS
-6-
After shutdown the DVR, press and hold (switch to NTSC) or (switch to PAL) first, then press the power button
again to reboot the DVR (press until the monitor shows video images).
Note: The DVR will automatically detect PAL/NTSC system. But you can also manually switch between PAL
and NTSC systems.
17) Key Lock
Press “MENU” + “ENTER” on the DVR front panel at the same time to lock keys and to log in with another user name.
2.1.2 DVR-860
1) “POWER”
Press “POWER” button to turn on/ turn off the DVR.
(Under the recording mode, please stop recording before turning off the DVR)
2) “MENU”
Press “MENU” button to enter the main menu.
3) “ENTER / RECORD”
Press “ENTER” button to confirm.
Press “RECORD” to activate the manual recording
4) “＋ “ “ － ” :
Press “＋“ or “－” button to change the setting in the menu / to select the channel.
Press “＋“ and “－” buttons simultaneously to open / close the DVD / CD WRITER.
5) USB
Support firmware update and file backup.
6) LED LIGHT:
POWER: Power on
STANDBY: Standby
HDD: HDD is reading or recording
HDD Full: HDD is full.
ALARM: Once the alarm is triggered
TIMER: When timer recording is turned on.
REC: Under the recording status
PLAY: Under the playing status
1 2 3
4
5
6
7 8 9 10 11 12 13
14
Shift .