Planet Technology DVR-460 - Manual (Page 53)

4-CH MPEG-4 Digital Video Recorder 53
Record Setting
Press “ ” to go into the “Record Se
‧ Record type
‧ Hard disk overwriting
‧ Pre- / post-alarm record time
‧ Record time setting
Record path
‧
tting” page, and you can set the following items:
Record type
In this section, you can select which type of the recording will be enabled. There are 4
le / Motion / Alarm.
recorded data from the earliest to the latest when the hard disk is full,
check “Hard Disk Overwrite” checkbox.
Pre- / post-alarm record time
Select the pre-/post-alarm recording time from 0 sec. to 60 sec.
Record time setting
There are two ways to set the record time: Weekly and Custom.
options: Manual / Schedu
Hard disk overwriting
To overwrite the