Planet Technology DVR-460 - Manual (Page 31)

4-CH MPEG-4 Digital Video Recorder 31
The submenu tems are d scribed below:
1) TITLE i e
set in “CAMERA”. Show the camera title of each channel
2) DEVICE
connected camera for each
3)
Select the device type (CAMERA / PTZ) according to the
channel.
ID
Set the ID number (0 ~ 255) for a PTZ camera.
r connecting to a PTZ camera correctly, the default ID of the PTZ camera will be
4)
Afte
shown on the screen.
PROTOCOL
Select NORMAL (our protocol) or P-D (PELCO-D) protocol.
5) RATE
Set the baud rate of each channel (2400 / 4800 / 9600 / 19200 / 57600). For the
ted cameras, such as PTZ and speed dome cameras, etc., please make sure
7.4 Display
connec
their baud rate setting is the same as the setting here.
t, you can check and change some display settings.
ove the cursor to “DISPLAY”, and press ”ENTER”. You will see a similar screen as the
ANCE DISPLAY
In this menu lis
M
following:
ADV
CAMERA DE-INTERLACE ON
DETECTI FULL SCREEN DWELL DURATION (S 03 ON EC)
REMOTE CHANNEL TITLE ON
DISPLAY EVENT STATUS ON
ALERT DATE DISPLAY ON
SYSTEM
NETWORK LT YOUR INSTALLER FOR ADVANCE SETTING PLEASE CONSU
BACKUP uv SELECT s BACK t NEXT ENTER
HDD INFO
EVENT LOG
The submenu items are described below:
) DE-INTERLACE 1
ACE” function (ON / OFF).
WELL DURATION (SEC)
Select to enable or disable “DE-INTERL
2) FULL SCREEN D
Set the full screen dwell duration time (3 / 5 / 10 / 15 seconds).