Planet Technology DVR-460 User Manual

Page 34

DVR-460 User Guide

2) BAUDRATE

Press “UP” / “DOWN” button to set the baud rate of the DVR (2400 / 9600 / 19200 /
57600).

3) HOST ID

Press “UP” / “DOWN” button to set the ID of the DVR (0 ~ 255).
PASSWO

TER” to reset the password for accessing the DVR system (ADMIN

up to 4 digits.

Press “EN
PASSWORD or GUEST PASSWORD). You can set the password

Note:

Users who use guest password to access the DVR will be only allowed to view the live
streaming video and sequence display, shift the channel display, and lock keys.

5) RESET DEFAULT

Press “ENTER” to reset all settings as default, and select “YES” to confirm or “NO” to

ancel.

6) CLEAR HDD

Press “ENTER”, and select “YES” to confirm to clear HDD or “NO” to cancel.

7) UPGRADE

”, and select “YES” to confirm upgrade or “NO” to cancel.

Press “ENTER

Note:

1. To use this function, you need to have the upgrade file saved in a compatible USB flash drive,

nd insert it into the USB port at the front or rear panel.

ot disconnect the power of your DVR while the upgrade process is in progress, or the

a
2. Do n
DVR functions may not work normally or be unable to use.

8) AUTO KEYLOCK

Set the time-out in second after which the key lock function is activated (Never / 10 / 30 /

0).

ort multi-language)

9) LANGUAGE (Supp

10) VIDEO FORMAT

Press “ENTER” to select the language of the OSD.

video format (NTSC / PAL).

11)

Here shows the information of the DVR

VERSION

Here shows the firmware version information.