Panasonic KX-PS8100 - Manual (Page 283)

283
Options
3 a) Align the network card into the cutout in the front
bracket.
b) Insert the network card into the network card
connector.
c) Secure the network card to the front bracket using
the two screws you removed from the slot cover.
4 Replace the printer controller board in the printer.
For instructions, see “Removing and replacing the printer controller
board” on page 273 .
5 Connect the printer to a network.
For instructions, see Chapter 3 “Connecting the Printer to a
Network” .
c
a
b
Network card
[The figure is Ethernet
(KX-PNBC5) card.]