Network details – Palm TapWave Zodiac User Manual

Page 134

S e t t i n g P r e f e r e n c e s

Network

Using Your Zodiac Console 134

134

connected. To turn off Call Waiting, check the Disable call waiting

box, and enter the code to turn off Call Waiting. If you don’t know

the code, contact your local telephone company for the

appropriate code.

– Use calling card. Indicate whether you want to put the charges for

the phone call on a calling card. To activate this option, check the

Use Calling Card box, and then on the Use Calling Card line, enter

three commas followed by your calling card number. Each comma

delays transmission of your calling card number for two seconds, to

compensate for the delay before the number is entered.

NOTE:

NOTE: MCI customers must enter the calling card number in the Phone #
field, and the phone number in the Use Calling Card field.

Network Details

The Details dialog box enables you to select TCP/IP settings. When you tap the
Details button, you have the following additional options:

•

Connection type. Select the connection protocol you want to use for
this service template:

– PPP for Point-to-Point protocol. Select this type if you’re unsure

which you need. If PPP doesn’t work, ask your ISP or your system

administrator for the correct connection type.

– SLIP. Select this type for Serial Line Internet protocol connections.
– CSLIP. Select this type for Compressed Serial Line Internet protocol

connections.