Lenovo 6532 - Manual (Page 182)

Updating the server configuration
When you start the server for the first time after you add or remove an internal option or external device,
you might receive a message that the configuration has changed. The UEFI Setup Utility program starts
automatically so that you can save the new configuration settings.
Some options have device drivers that you must install. For information about installing device drivers, see
the documentation that comes with each option.
If the server has an optional RAID and you have installed or removed a hard disk drive, see the documentation
that comes with the RAID for information about reconfiguring the disk arrays.
For information about configuring the integrated Gigabit Ethernet controller, see “Configuring the Gigabit
Ethernet controllers” on page 218.
174 Hardware Maintenance Manual