Lenovo 6532 User Manual
Hardware maintenance manual
Table of contents
Document Outline
- Chapter 1. About this manual
- Chapter 2. General information
- Chapter 3. General Checkout
- Chapter 4. Diagnostics
- Diagnostic tools
- Event logs
- POST
- System-event log
- Integrated management module error messages
- Troubleshooting tables
- EasyStartup problems
- DVD drive problems
- General problems
- Hard disk drive problems
- Hypervisor problems
- Intermittent problems
- Keyboard, mouse, or pointing-device problems
- Memory problems
- Microprocessor problems
- Monitor problems
- Optional-device problems
- Power problems
- Serial-device problems
- Software problems
- Universal Serial Bus (USB) port problems
- Video problems
- Error LEDs
- Power-supply LEDs
- System pulse LEDs
- Diagnostic programs and messages
- Recovering the server firmware
- Automated boot recovery (ABR)
- Three boot failure
- Solving power problems
- Solving Ethernet controller problems
- Solving undetermined problems
- Problem determination tips
- Chapter 5. Locating Server Controls and connectors
- Chapter 6. Replacing FRUs
- Guidelines for trained service technicians
- Working inside the server with the power on
- Handling static-sensitive devices
- Major components of the server
- Removing and installing the cover
- Removing and installing the bezel
- Removing and installing the DIMM air baffle
- Replacing a memory module (DIMM)
- Replacing hard disk drives
- Replacing a PCI card
- Replacing a USB embedded hypervisor flash device
- Replacing the operator information panel assembly
- Replacing the drive cage
- Replacing the microprocessor and heat sink
- Replacing the system board
- Replacing the power supply
- Replacing a fan assembly
- Replacing the system-board battery
- Replacing the SAS/SATA hard disk drive back plate or backplane
- Replacing the PCI riser-card assembly
- Replacing an IBM ServeRAID-BR10il SAS/SATA Controller
- Replacing the DVD drive cable
- Replacing a DVD drive
- Replacing the virtual media key
- Replacing the PCI-X riser-card power cable
- Updating the Universal Unique Identifier (UUID)
- Updating the DMI/SMBIOS data
- Completing the FRU replacement
- Chapter 7. Parts listing, RS210 Types 6531, 6532, 6533, and 6534
- Chapter 8. Configuring the server
- Using the Setup Utility
- Using the Boot Manager program
- Configuring RAID controllers
- Using the WebBIOS utility
- Using the EasyStartup DVD
- Updating the firmware
- Using the EasyUpdate Firmware Updater tool
- Starting the backup server firmware
- Recovering the UEFI firmware
- Using the integrated management module
- IBM Advanced Settings Utility program
- Installing ThinkServer EasyManage software
- Using the remote presence capability and blue-screen capture
- Enabling the Intel Gigabit Ethernet Utility program
- Configuring the Gigabit Ethernet controllers
- Enabling and configuring Serial over LAN (SOL)
- Appendix A. Notices
- Trademarks
- Important notes
- Product recycling and disposal
- Compliance with Republic of Turkey Directive on the Restriction of Hazardous Substances
- Recycling statements for Japan
- Battery return program
- German Ordinance for Work gloss statement
- Electronic emission notices
- Federal Communications Commission (FCC) statement
- Industry Canada Class A emission compliance statement
- Avis de conformité à la réglementation d'Industrie Canada
- Australia and New Zealand Class A statement
- United Kingdom telecommunications safety requirement
- European Union EMC Directive conformance statement
- Germany Class A compliance statement
- Japan Voluntary Control Council for Interference (VCCI) statement
- Taiwan Class A warning statement
- People's Republic of China Class A warning statement
- Korea Class A warning statement