Lexmark C520 - Manual (Page 31)

Printing only black text and graphics
31
Printing
2 Open the upper door fully. Grasp the handle on the inner door and pull to open both the inner and lower doors.
Gently lower the lower door. Now the photoconductor units can be seen.
3 Grasp the knob on the right side of the photoconductor unit, lift up on the knob to release the photoconductor unit,
and then lift the photoconductor unit by the handle.
The illustration on the left shows in detail how to remove one of the units, but as the illustration on the right shows,
all three color photoconductor units must be removed.
4 Use the packaging (which is a cover sheet and a bag that came on replacement photoconductor units) to cover
them. If these items were not saved from the original packaging, wrap a sheet of paper around each unit and seal
the sheet with tape, but do not attach the tape to the shiny photoconductor drum.
Handle
1 2