Linear DVS-1200 User Manual
Page 29
27
FIRE SIREN TIME
✦ The factory-set fi re siren time is fi ve minutes (UL
installation maximum).
STEP #32 The fi re siren time can be adjusted from one to 30
minutes using this step.
AUTOMATION OUTPUT TIME
✦ The factory setting causes the Automation Output
to toggle between on and off with each activation.
STEP #40 The Automation Output can be programmed to turn
on, then automatically turn off after one to 2500
seconds (42 minutes), or toggle on & off, using this
step.
REMOTE CONTROL ARMING LEVEL
✦ The factory setting causes the portable remote
controls to arm to the Away Mode.
STEP #50 The portable remote controls can be changed to
arm to the Home Mode using this step.
✎ NOTE: Changing this setting will affect all the
portable remote controls used with the system.
REMOTE CONTROL DISARMING LEVEL
✦ The factory setting causes the portable remote
controls to disarm to the Off Mode.
STEP #51 The remote controls can be changed to disarm to
the Chime Mode using this step.
✎ NOTE: Changing this setting will affect all the
portable remote controls used with the system.
ENTRY DELAY BEEPS
✦ The factory setting causes the Console to beep
during Entry Delays.
STEP #61 The Entry Delay beeps can be silenced using this
step.
✦ With the Entry Delay beeps off, the Console will be
silent after a delayed sensor is triggered until the
Entry Delay expires, then the alarm siren will sound.
EXIT DELAY BEEPS
✦ The factory setting causes the Console to beep
during Exit Delays.
STEP #62 The Exit Delay beeps can be silenced using this
step.
✦ With the Exit Delay beeps off, the Console will be
silent after arming to the Away Mode until the Exit
Delay expires, then a single “Gong” tone will sound.
3
DEF
2
ABC
HOME
AWAY
TIME IN MINUTES (1-30)
PROGRAMMING STEP #32
PROGRAM
STORE PROGRAM
4
GHI
0
HOME
AWAY
TIME IN SECONDS (1-2500)
0 = TOGGLE ON & OFF
PROGRAMMING STEP #40
PROGRAM
STORE PROGRAM
5
JKL
0
HOME
AWAY
PROGRAMMING STEP #50
PROGRAM
STORE PROGRAM
2 FOR HOME MODE
3 FOR AWAY MODE
5
JKL
1
HOME
AWAY
PROGRAMMING STEP #51
PROGRAM
STORE PROGRAM
0 FOR OFF MODE
1 FOR CHIME MODE
6
MNO
1
HOME
AWAY
PROGRAMMING STEP #61
PROGRAM
STORE PROGRAM
0 FOR ENTRY BEEPS OFF
1 FOR ENTRY BEEPS ON
6
MNO
2
ABC
HOME
AWAY
PROGRAMMING STEP #62
PROGRAM
STORE PROGRAM
0 FOR EXIT BEEPS OFF
1 FOR EXIT BEEPS ON