Advanced wireless setup, Creating an ad hoc wireless network – Lexmark S510 User Manual
Page 98

Advanced wireless setup
Creating an ad hoc wireless network
You can set up an ad hoc network if you:
•
Do not have an access point or wireless router.
•
Do not have a wireless network (but do have a wireless network adapter for your computer).
•
Want to set up a standalone network between the printer and a computer with a wireless network adapter.
Notes:
•
Before you begin, make sure your wireless network adapter is properly attached to your computer and is
working.
•
The recommended way to set up your wireless network is to use an access point (wireless router). This network
setup is called infrastructure network.
•
If your computer has My WiFi or Wi
‑
Fi Direct, then you can create direct connections to your wireless printer.
For more information, see the documentation that came with your computer.
•
The printer can communicate on only one wireless network at a time. Configuring the printer for an ad hoc
wireless network will keep it from working on any other wireless network, either ad hoc or infrastructure.
In Windows Vista or later
1
Click
> Control Panel > Network and Internet > Network and Sharing Center.
2
Click Set up a connection or network > Set up a wireless ad
‑hoc (computer‑to‑computer) network > Next.
3
Follow the instructions for setting up a wireless ad hoc network.
As part of the setup:
a
Create a network name or SSID for the network between the computer and your printer.
b
Write down the name of your network. Make sure you copy it exactly, including any capital letters.
c
From the Security Type list, select WEP or WPA2
‑Personal, and then create a WEP key or WPA/WPA2 pre-shared
key/passphrase.
WEP keys must be:
•
Exactly 10 or 26 hexadecimal characters
or
•
Exactly 5 or 13 ASCII characters
WPA/WPA2 pre-shared keys/passphrases must be:
•
Exactly 64 hexadecimal characters
or
•
From 8 to 63 ASCII characters
Notes:
•
Hexadecimal characters are A–F, a–f, and 0–9.
•
ASCII characters are letters, numbers, and symbols found on a keyboard. ASCII characters in a
WPA/WPA2 pre-shared key/passphrase are case
‑sensitive.
d
Write down the password for your network. Make sure you copy it exactly, including any capital letters.
Networking
98