Ink cartridge missing, Ink cartridge unsupported, Ink low – Lexmark S510 User Manual
Page 133: Load [size] paper, Load [size] [type] paper
•
Turn the printer off, then wait about 10 seconds, and then turn the printer back on.
Note: Make sure the printer is not in Sleep mode. Press and hold for three seconds to turn off the printer.
•
See the User's Guide or visit the Lexmark Support Web site at or more information.
Ink Cartridge Missing
Try one or more of the following:
•
Install the specified missing ink cartridge or cartridges.
•
Reinsert the specified ink cartridge or cartridges.
•
Press
or
to clear the message.
•
See the User's Guide or visit the Lexmark Support Web site at or a list of supported
ink cartridges.
Ink Cartridge Unsupported
Try one or more of the following:
•
Replace the unrecognized ink cartridge with one that is supported by your printer.
•
Use only genuine Lexmark ink cartridges.
•
Press
or
to clear the message.
•
See the User's Guide or visit the Lexmark Support Web site at or a list of supported
ink cartridges.
Ink Low
You may need to replace the specified ink cartridge soon. Try one or more of the following:
•
Press
or
to clear the message and continue printing.
Note: Depending on your printer settings, you may not be allowed to continue printing until you replace the
specified cartridge.
•
See the User's Guide or visit the Lexmark Support Web site at or a list of supported
ink cartridges.
Load [Size] Paper
Try one or more of the following:
•
Load the correct paper size in the paper support, and then press
to continue printing.
•
Press
to cancel the current job.
Load [Size] [Type] Paper
Try one or more of the following:
•
Load the correct paper size and paper type in the paper support, and then press
to continue printing.
•
Press
to cancel the current job.
Troubleshooting
133