Programmed playback, Chapter programmed playback 1 – Sharp DV-NC70(RU) User Manual
Page 91
89
GB
Programmed Playback
The two types of programmed playback provided by this product are
chapter programmed playback (DVD discs) and track programmed
playback (Audio CD discs).
Chapter Programmed Playback
1
Press PROG while the disc is stopped.
• The “DVD-VIDEO PROGRAM” screen appears.
• Press PROG to return to the normal screen.
2
Press ' or " to select the desired title and then press ENTER.
• The chapter selection screen appears.
3
Press ' or " to select the desired chapter and press ENTER.
• The chapter is programed in the playlist.
• Repeat the above step for each of the chapters that you want
to play as part of the program.
• To delete the chapter programmed in the playlist, follow the
steps below.
1 Press | to move the cursor to the playlist.
2 Press ' or " to select the program (chapter) you want to
delete and then press RETURN.
• To delete all programmed chapters, move the cursor to the
playlist and then press RETURN for more than two seconds.
4
Press ûPLAY to begin playing the programmed chapters.
• The chapters will be played in the order they were entered.
• The PROGRAM indicator lights up on the DVD Front Panel
display.
5
Press Л
Л
Л
Л
ЛSTOP to stop programmed playback.
• To start programmed playback again, follow the steps below.
1 Press Л
Л
Л
Л
ЛSTOP to stop programmed playback.
2 Press PROG.
3 Select the title you programmed and press ENTER. (If
other titles are selected, the previously entered program
will be cleared.)
4 Press ûPLAY.
/
PLAY
STOP
OPEN/
CLOSE
OPERATE
VCR/DVD
SELECTOR
VCR MENU
DVD SETUP
TAPE
SPEED
ON
SCREEN
TIMER
ON/OFF
TITLE
DVD MENU
DISPLAY
EJECT
PROG
FUNCTION
CONTROL
PROG/
REPEAT
CLEAR
RETURN
REV
FWD
SET
ENTER
ZERO BACK
SKIP SEARCH
VCR DVD
AM/PM
INPUT SELECT
PAUSE/STILL
REC
VCR/DVD COMBINATION
SLOW
CH
VCR
DVD
SKIP
DPSS
AUDIO
OUTPUT
ANGLE
• Up to 24 chapters can be programmed.
• Press RETURN to return to the
previous screen.
• The program cannot be set during the
normal playback.
• This function can only be used for
DVD discs on which the chapter has
been recorded.
• On some discs in which programmed
playback is prohibited, this function is
disabled.
DVD
DVD
SET
SELECT
DVD-VIDEO PROGRAM
TITLE
1
2
3
ENTER
S TA R T
SELECT
DVD-VIDEO PROGRAM
: 2 : 2
1 1:
2 2:
3 3:
4:
5:
6:
RETURN
S TA R T
SELECT
DVD-VIDEO PROGRAM
: 2 : 2
1 1: 3
2 2: 1
3 3:
4:
5:
6:
RETURN