Sharp DV-NC70(RU) - Manual (Page 74)

GB 72
6
Press Ж Ж Ж Ж ЖREC.
• The images on the DVD disc are recorded onto the VCR
cassette.
• When the VCR is in stop mode, the channel returns to the previ-
ously received channel.
• The VCR/DVD SELECTOR is fixed to VCR in the Tape Editing
mode (VCR \ DVD indicator lights up).
• Operate the VCR/DVD SELECTOR after pressing VCR\ \ \ \ \ DVD,
and after the Tape Editing mode has been cleared (VCR \ DVD
indicator stops lighting up).
• The following are not signs of trouble.
1 The brightness of images from regular DVD disc playback and
from discs played in Tape Editing mode might vary.
2 The discs playing time and the Real time counter slightly vary when
recording.
• The DVD/VCR output jacks become VCR fixed.
• The following operations cancel the DVD/VCR output and return to the
regular external input.
1 Programming the timer.
2 Setting the recording ending time during Pause.
3 Turning OPERATE on or off after entering the Tape Editing mode.
• Copy protected DVD discs cannot be recorded (The image will be
distorted, when Ж Ж Ж Ж ЖREC is pressed).
• If the DVD on screen display is “ON” while recording, the display will
also be recorded.
The recordings, which you make from TV/radio broadcasts or audio
sources (such as records) are for your own private use, and cannot be
used without prior permission or consent of the author.
/
PLAY
STOP
OPEN/
CLOSE
OPERATE
VCR/DVD
SELECTOR
VCR MENU
DVD SETUP
TAPE
SPEED
ON
SCREEN
TIMER
ON/OFF
TITLE DVD MENU
DISPLAY
EJECT PROG
FUNCTION
CONTROL
PROG/
REPEAT
CLEAR
RETURN
REV FWD
SET
ENTER
ZERO BACK
SKIP SEARCH
VCR DVD AM/PM INPUT SELECT
PAUSE/STILL REC
VCR/DVD COMBINATION
SLOW
CH
VCR DVD
SKIP
DPSS
AUDIO
OUTPUT
ANGLE
Recording a DVD Disc onto a Video Cassette