Sharp DV-NC70(RU) - Manual (Page 47)

45 GB
DVD Setup
3
Use ' or " to select “COMPRESSION”.
4
Press ENTER to display the settings you can select.
5
Use ' or " to select “ON” or “OFF”.
• Use of the “OFF” setting is recommended when the product is
connected to audio equipment.
6
Press ENTER to confirm the setting.
• When you have completed the above setting, press RETURN to
return to the SETUP screen. However, if you want to specify the
“
DIGITAL” setting in succession, proceed to step 1 below.
• Whenever the “COMPRESSION” setting is “ON”, the 3D VIRTUAL
SURROUND setting is automatically changed to “OFF”.
Setting the DOLBY DIGITAL
When playing a disc recorded using Dolby Digital (5.1ch), you can
specify either “BITSTREAM” or “D-PCM” as the digital type output.
• Before setting the “
DIGITAL” , perform the step 1 and 2 on
page 46.
1
Use ' or " to select “ DIGITAL”.
2
Press ENTER to display the settings you can select.
3
Use ' or " to select “BITSTREAM” or “D-PCM”.
BITSTREAM: Use this setting for a digital connection of a
receiver (amplifier) equipped with a Dolby
Digital decoder.
D-PCM: Use this setting for a digital connection to the
(Down Mix PCM) PCM digital input jack of a DAT or MD, or for
a digital connection to a receiver (amplifier)
that does not have a Dolby Digital decoder.
4
Press ENTER to confirm the setting.
5
When you have completed the setting above, press RETURN to
return to the SETUP screen. However, if you want to go on and
specify the other settings, use ' or " to display other setting
screen.
/
PLAY
STOP
OPEN/
CLOSE
OPERATE
VCR/DVD
SELECTOR
VCR MENU
DVD SETUP
TAPE
SPEED
ON
SCREEN
TIMER
ON/OFF
TITLE DVD MENU
DISPLAY
EJECT PROG
FUNCTION
CONTROL
PROG/
REPEAT
CLEAR
RETURN
REV FWD
SET
ENTER
ZERO BACK
SKIP SEARCH
VCR DVD AM/PM INPUT SELECT
PAUSE/STILL REC
VCR/DVD COMBINATION
SLOW
CH
VCR DVD
SKIP
DPSS
AUDIO
OUTPUT
ANGLE
AUDIO
COMPRESSION
ON
OFF
ENTER RETURN
SELECT
ENTER
AUDIO
DIGITAL
D-PCM
ENTER RETURN
SELECT
ENTER
BITSTREAM