Sharp DV-NC70(RU) - Manual (Page 23)

21 GB
/
PLAY
STOP
OPEN/
CLOSE
OPERATE
VCR/DVD
SELECTOR
VCR MENU
DVD SETUP
TAPE
SPEED
ON
SCREEN
TIMER
ON/OFF
TITLE DVD MENU
DISPLAY
EJECT PROG
FUNCTION
CONTROL
PROG/
REPEAT ANGLE
CLEAR
RETURN
REV FWD
SET
ENTER
ZERO BACK
SKIP SEARCH
VCR DVD AM/PM INPUT SELECT
PAUSE/STILL REC
VCR/DVD COMBINATION
SLOW
CH
VCR DVD
SKIP
DPSS
AUDIO
OUTPUT
Auto Tuning System
This Product is equipped with an Auto Tuning System to provide
easier set up of the Product. After following the instructions for
“Basic Connection” on pages 14 and 15 and “Adjusting the Video
Channel” on page 19, turn on your TV, press OPERATE to turn on
the Product, and select the video channel. The Product will automati-
cally display the setting screens as shown below.
• If the Language selection and Auto Tuning have already been
performed, the Clock setting screen will first appear. To reset all VCR
settings and perform the Auto Tuning from the Language setting
screen, see page 37. (Perform “VCR-RESET”)
SYSTEM
setting screen
AUTOMATIC TUNING screen
Press SET. (Manual operation)
Press VCR MENU to cancel the next step.
CLOCK setting screen
Press SET. (Manual operation)
Normal screen appears.
Selection of broadcast system (SYSTEM)
(I, B/G, D/K) that correspond with your
area. (See page 28, step 3.)
Selection of language to be used for
the On Screen Display. (See page 37.)
Setting and sorting the channels for your
area. (See page 28.)
Setting the present time. (See page 35.)
LANGUAGE setting screen
Press SET. (Manual operation)