beautypg.com

Setting the mpeg, Setting the cinema voice – Sharp DV-NC70(RU) User Manual

Page 48

background image

GB

46

Setting the MPEG

• Before setting the “MPEG”, perform the step 1 to 2 on pages 47 and 48.

1

Press ENTER and then use ' or " to select “MPEG”.

2

Press ENTER to display the settings you can select.

3

Use ' or " to select “BITSTREAM” or “PCM”.

BITSTREAM: Use this setting for a digital connection of a

receiver (amplifier) equipped with an MPEG
Audio decoder.

PCM:

Use this setting for a digital connection to the
PCM digital input jack of a DAT or MD, or for a
digital connection to a receiver (amplifier) that
does not have an MPEG Audio decoder.

4

Press ENTER to confirm the setting.

5

Press RETURN to exit the SETUP screen and return to normal screen.
• If you want to go on and specify other settings, use ' or " to

display the other SETUP screen without pressing RETURN.

When playing a disc recorded using DTS, the bitstream type signal
is output regardless of the setting of “

DIGITAL” and “MPEG”.

Setting the CINEMA VOICE

This function is raising the sound of the center speaker to make the
voices in a movie easier to hear.

• Before setting the “CINEMA VOICE” , perform the step 1 and 2 on page 46.

1

Use ' or " to select “CINEMA VOICE”.

2

Press ENTER to display the settings you can select.

AUDIO
CINEMA VOICE

ON

OFF

ENTER

RETURN

SELECT

ENTER

3

Use ' or " to select “ON” or “OFF”.

ON:

Set to “ON” when you want to raise the sound of the voice.

OFF:

Set to “OFF” when you do not want to use this function.

4

Press ENTER to confirm the setting.

5

When you have completed the setting above, press RETURN to return
to the SETUP screen. However, if you want to go on and specify the
other settings, use ' or " to display other setting screen.

• The CINEMA VOICE setting raises the sound of the center channel

threfore it does not affect the voices in other channels.

• Even if this function is set to “ON”, the result may or may not be

effective depending on the disc.

/

PLAY

STOP

OPEN/

CLOSE

OPERATE

VCR/DVD

SELECTOR

VCR MENU

DVD SETUP

TAPE

SPEED

ON

SCREEN

TIMER

ON/OFF

TITLE

DVD MENU

DISPLAY

EJECT

PROG

FUNCTION

CONTROL

PROG/

REPEAT

CLEAR

RETURN

REV

FWD

SET

ENTER

ZERO BACK

SKIP SEARCH

VCR DVD

AM/PM

INPUT SELECT

PAUSE/STILL

REC

VCR/DVD COMBINATION

SLOW

CH

VCR

DVD

SKIP

DPSS

AUDIO

OUTPUT

ANGLE

DVD Setup

ENTER

RETURN

SELECT

ENTER

BITSTREAM