Tray missing, Unsupported usb device, please remove, Unsupported usb hub, please remove – Lexmark 382 User Manual
Page 168: Unsupported mode, Usb drive disabled, Use camera controls to print, Waiting, Waiting, too many events, Yy cartridge missing, Yy defective cartridge
Tray
Insert the specified tray into the printer.
Unsupported USB device, please remove
Remove the unrecognized USB device.
Unsupported USB hub, please remove
Remove the unrecognized USB hub.
Unsupported Mode
Remove the camera, and then change the mode to PictBridge. Reconnect the camera.
USB drive disabled
A USB drive was inserted into the printer, and the port is disabled. Contact your system support person.
Use camera controls to print
A recognized PictBridge-compatible camera is attached to the printer.
Waiting
The printer has received data to print, but is waiting for an End-of-Job command, a Form Feed command, or additional
data.
Try one or more of the following:
•
Press
to print the contents of the buffer.
•
Cancel the current print job.
Waiting, too many events
Wait for the message to clear.
Warning—Potential Damage: Do not turn the printer off while this message appears on the display.
30.yy
Insert the missing toner cartridge to clear the message and continue printing.
31.yy Defective
Replace the defective toner cartridge with a new one.
31 Defective Imaging Kit
Replace the imaging kit.
Understanding printer messages
168