Lexmark 382 - Manual (Page 140)

Menu item Description
Factory Defaults
Do Not Restore
Restore Now
Returns the printer settings to the factory default settings
Notes:
• Do Not Restore is the factory default setting. Do Not Restore
keeps the user-defined settings.
• Restore returns all printer settings to the factory default
settings except Network/Ports menu settings. All downloads
stored in RAM are deleted.
Copy Settings menu
Menu item Description
Content
Text
Text/Photo
Photograph
Specifies the type of content contained in the copy job
Notes:
• Text emphasizes sharp, black, high-resolution text against a clean, white
background.
• Text/Photo is the factory default setting. Text/Photo is used when the original
documents are a mixture of text and graphics or pictures.
• Photograph tells the scanner to pay extra attention to graphics and pictures.
This setting increases the time it takes to scan, but emphasizes a reproduction
of the full dynamic range of tones in the original document. This increases the
amount of information saved.
Sides (Duplex)
1 sided to 1 sided
1 sided to 2 sided
2 sided to 1 sided
2 sided to 2 sided
Specifies whether an original document is duplex (two-sided) or simplex (one-
sided), and then specifies whether the copy should be duplex or simplex
Notes:
• Duplex is not available on selected models.
• 1 sided to 1 sided—The original page has printing on one side. The copied
page will have printing on one side.
• 1 sided to 2 sided—The original page has printing on one side. The copied
page will have printing on both sides. For example, if the original is six sheets,
the copy is three sheets with printing on both sides.
• 2 sided to 1 sided—The original page has printing on both sides. The copied
page will have printing on only one side. For example, if the original draft is
three sheets of paper with an image on each side of each sheet, then the copy
is six sheets with only one image on one side of each sheet.
• 2 sided to 2 sided—The original page has printing on both sides. The copy
mimics the original exactly.
Paper Saver
Off
2 on 1 Portrait
2 on 1 Landscape
4 on 1 Portrait
4 on 1 Landscape
Sets two or four sheets of an original document together on the same page
Note: Off is the factory default setting.
Understanding printer menus
140