Lexmark 382 User Manual
Page 143
Menu item
Description
Enable Manual Fax
On
Off
Sets the printer to fax manually only, which requires a line splitter and a telephone
hand set
Notes:
•
Off is the factory default setting.
•
Use a regular telephone to answer an incoming fax job and to dial a fax number.
•
Touch # 0 on the numeric keypad to go directly to the Manual Fax function.
Memory Use
All receive
Mostly receive
Equal
Mostly sent
All send
Defines the amount of non-volatile memory used to fax a job
Notes:
•
“All receive” specifies that all the memory is set to receive fax jobs.
•
“Mostly receive” specifies that most of the memory is set to receive fax jobs.
•
Equal is the factory default setting. Equal splits the memory for sending and
receiving fax jobs into equal amounts.
•
“Mostly sent” specifies that most of the memory is set to send fax jobs.
•
“All send” specifies that all the memory is set to send fax jobs.
Cancel Faxes
Allow
Don't Allow
Specifies whether the printer may cancel fax jobs
Note: If Cancel Faxes is not enabled, it will not appear as an option.
Caller ID
FSK
DTMF
Specifies the type of caller ID being used
Note: FSK is the factory default setting.
Fax Send Settings
Menu item
Description
Resolution
Standard
Fine
Super Fine
Ultra Fine
Specifies quality in dots per inch (dpi). A higher resolution gives greater print quality,
but it increases the fax transmission time for outgoing faxes.
Note: Standard is the factory default setting.
Understanding printer menus
143