Lexmark 24XX-100 - Manual (Page 101)

Repair Information 4-41
24xx
Roller, Lower Feed Removal
1. Remove the top cover. Go to “Covers, Top Removal” on
page 4-8 .
2. Remove the print unit. Go to “Print Unit Removal” on
page 4-28 .
3. Remove the carrier. Go to “Carrier Removal” on page 4-16 .
4. Remove the two screws securing the black bracket to the inside
of the right side frame.
5. Remove the right side sub frame and the right side gears. Go to
“Right Side Gears, Sub Frame Removal” on page 4-34 .
6. Remove the left side gears. Go to “Left Side Gears Removal”
on page 4-31 .
7. Remove the gears and C-clip from both ends of the lower feed
roller.
8. Remove the upper feed roller. Go to “Roller, Upper Feed
Removal” on page 4-36 .