Table 7–3 – Lucent Technologies MERLIN LEGEND 5 User Manual
Page 328

MERLIN LEGEND Communications System Release 5.0
System Manager’s Guide
555-650-118
Issue 1
June 1997
Learning More
Page 7-16
System Guides Information Finder
7
Table 7–3.
Information Finder: Programming
To learn about. . .
Check this guide. . .
Systemwide Basics
Changing the system’s mode of operation
Consult your Lucent Technologies
representative and
System Programming,
Chapter 4
Changing the system programming position
System Programming, Chapter 3
Changing the system date and time
System Programming, Chapter 3
Changing the system language
System Programming, Chapter 3
Changing the system’s numbering of lines
and extensions
System Programming, Chapter 3
Changing DSS buttons when you renumber
the system
System Programming, Chapter 4
Operator positions
System Programming, Chapter 3
Turning One-Touch Transfer or One-Touch
Hold on or off
System Programming, Chapter 4
Changing the timing for the return to the
originator of transferred, parked, or
camped-on calls when the destination
extension remains busy
System Programming, Chapter 4
Changing what a caller hears when being
transferred
System Programming, Chapter 4
Changing the number of rings for the Delay
Ring setting
System Programming, Chapter 4
Programming a CTI (Computer Telephony
Integration) link (Release 5.0 and later)
System Programming, Chapter 4
Extension Features and Buttons
Feature programming codes
System Programming, Appendix D
Allowing or disallowing trunk-to-trunk
transfer at an extension.
System Programming, Chapter 3
Planning features on buttons
Feature Reference, Appendixes B and G
System Programming, Appendix E
Copying programmed telephone features
and line buttons from one extension to
another
System Programming, Chapters 3 and 5
Copying calling restrictions from one
extension to another
System Programming, Chapter 3
Which system planning forms show how
features are programmed
Feature Reference, Appendix B
The modes of operation in which a
systemwide feature is available
Feature Reference, Appendix C
Continued on next page