Lucent Technologies MERLIN LEGEND 5 - Manual (Page 273)

MERLIN LEGEND Communications System Release 5.0
System Manager’s Guide
555-650-118
Issue 1
June 1997
Managing the System
Page 6-55 Changing Coverage Delay Options
6
o
Program the change(s), following the instructions for “Coverage Delays” in
the “Telephones” section of
System Programming, Chapter 3, or the
summary programming instructions below.
o
When you have finished, file the forms with the rest of the planning forms.
Programming Instructions 6
Console Procedures Change the number of rings before a call is sent to
Group Coverage receivers:
Extensions
→
More
→
More
→
Cover Delay
→
Group Cover
→
Dial sender’s ext. no.
→
Enter
→
Dial no. of rings (1–9)
Change the delay for Primary Cover buttons
programmed for Delay Ring; change the additional delay
before a call is sent to Group Coverage receivers when
Primary or Secondary Coverage Receivers are
available:
Extensions
→
More
→
More
→
Cover Delay
→
Primary
→
Dial sender’s ext. no.
→
Enter
→
Dial no. of
rings (1–6)
→
Enter
→
Exit
Change the delay for Secondary Cover buttons
programmed for Delay Ring:
Extensions
→
More
→
More
→
Cover Delay
→
Secondary
→
Dial sender’s ext. no.
→
Enter
→
Dial no. of rings (1–6)
→
Enter
→
Exit
PC Procedures Change the number of rings before a call is sent to
Group Coverage receivers:
"
→ → → → →
Type sender’s ext.
no.
→ →
Type no. of rings (1–9)
→ →
!
Change the delay for Primary Cover buttons
programmed for Delay Ring; change the additional delay
before a call is sent to Group Coverage receivers when
Primary or Secondary Coverage Receivers are
available:
"
→ → → → →
Type sender’s ext.
no.
→ →
Type no. of rings (1–6)
→ →
!
Change the delay for Secondary Cover buttons
programmed for Delay Ring:
"
→ → → → →
Type sender’s ext.
no.
→ →
Type no. of rings (1–6)
→ →
!