Lucent Technologies MERLIN LEGEND 5 User Manual
Page 240
MERLIN LEGEND Communications System Release 5.0
System Manager’s Guide
555-650-118
Issue 1
June 1997
Managing the System
Page 6-22
Programming from a PC with SPM
6
To access SPM through a local or remote modem connection, follow the steps
below. For more information about the procedure format, see
Programming Procedures’’ on page 6-3
Console/Display Instructions
Additional Information
Set up the appropriate physical connections between the PC and the control
unit as described in Chapter 2 of
System Programming.
Type
spm
and press
P
to display the SPM Welcome screen shown below.
Press any key to display a blank screen on which you can enter modem com-
mands. (You may have to press the key several times.)
Make a data connection to the modem of the control unit.
See Chapter 2, “Programming with SPM,” in
System Programming. When the
connection is made, the password prompt appears, as shown in Step
Type the remote access password to display the SPM Main Menu shown in
Step
.
The password does not display when you type it.
To reach the System Programming menu, select System Programming by
pressing
.
Welcome to SPM
X.XX
= current version of SPM
The MERLIN LEGEND
System Programming
& Maintenance Utility
Please press any key
to continue
Version X.XX
Enter Password:
SPM Main Menu
Menu: Select Function
Sys Prog
Maintenance
"
Backup
Restore
#
Boards
Pass-Thru
$
Print Opts
Password
%
!
Monitor
Language