Lexmark 4227-X00 - Manual (Page 29)

2-6 Service Manual
4227-X00
Load/Unload
does not function.
Form feed length is
not correct.
Load/Unload
functions with cut
sheets in use.
Be sure the paper select lever is in the correct
position.
There may be a problem with the paper select
sensor. Go to the
“Paper Feed Service Check”
on page 2-20 .
Paper feeds, but
Auto Loading does
not work. Be sure the paper select lever is in the cut sheet
position.
Be sure Auto Cut Sheet is enabled in the Paper
Handling Option Menu.
Go to the “Paper Feed Service Check” on
page 2-20 .
Lower feed roll shaft
rotates, but paper
does not feed.
Pressing Form Feed
does not feed paper.
Abnormal noise
while feeding.
Paper jams, skews
or creases.
Incorrect or no line
spacing: wider,
narrower, or
overlapping lines.
Incorrect Top of
Form positioning.
Be sure the paper select lever is in the correct
position.
Go to the “Paper Feed Service Check” on
page 2-20 .
Symptom Action