Kodak 4800 - Manual (Page 46)

Technical information B
MEDIA TYPES:
Photo paper, paper matte, drafting films,
and specialty.
MEDIA ROLL PARAMETERS
Inner roll core: 2" and 3"
Max. outside roll diameter: 6"
Max. roll width: 60", 42"
RESOLUTION:
600 x 600 dpi
300 x 300 dpi RTI
FEATURES:
Rollfeed with cutter
Power feed and takeup
8 user-savable settings
Power PC 50MHZ processor
ink cartridges (8)
500 ml ink reservoirs (8)
Two sets of ink lines on one cartridge
set(12 lines total)
Ink priming system
LINE LENGTH ACCURACY:
+/- 0.2% in paper and carriage axis using
roll feed, 4 mil drafting matte film.
Image frame length (X-axis) variation +/-
0.2% and width (Y-axis) variation +/-0.06%
+/- 0.024" (.6mm).
BUFFER:
One 168-pin PC133 DIMM slot.
64 MB standard
User upgradeable to 128 MB or 256 MB
INTERFACES:
Bidirectional Parallel (IEEE 1284)
10/100BaseT (RJ45 connector)
POWER:
90-264 VAC 47-63 Hz
Consumption:
20 W Idle
185 W Typical
285 W Maximum (printer only)
1485 W Maximum (printer and dryer)
OPERATING ENVIRONMENT:
65° - 85°F (18°- 30°C)
20-70% RH, Non-condensing
STORAGE ENVIRONMENT:
40° - 95°F (4°- 35°C)
5-80% RH, Non-condensing
CERTIFICATIONS:
Safety
CSA, CSE/NRTL,
(equivalent to UL1950)
TUV GS
EN 50 082-1
EN 60 950
UL1950
NOM-019-SCFI-1993
IEC 950
AS/NZS 3260
EMI
FCC Class A
CSA C108.8
EN 55 022 Class A
CE Mark
CISPR 22- Class A
AS/NZS 3548
VCCI Class A
Made in the U.S.A.