Kodak 4800 - Manual (Page 31)

Printer Options 2-14
Reference Guide
Auto-Cut Delay
Auto-Cut Delay allows you to set a delay time before the printer automatically performs
the Auto-cut function. This provides additional time for unattended prints to dry. In
addition, you may want to delay auto-cut depending on the media you are using, the
ambient temperature and the humidity. Auto-Cut Delay values range from 0 to 55
seconds in five second intervals and 1 to 60 minutes in one minute intervals. When the
delay time has expired, the printer rolls or cuts the image and begins printing the next
image in the buffer. Auto-Cut Delay is ignored when Auto-cut is set to Off.
ê
To set Auto-Cut Delay
1 Press Setup Menu/Ink OptionMenu/Auto-Cut Menu/Auto-Cut Delay.
2 Choose a time.
3 Press OK.
Delay Status
Delay Status allows users to view the time remaining before Auto-Cut and cancel the
remaining delay time, if desired. A countdown timer displays time left before Auto-Cut in
minutes and seconds. Reset Counter forces the count to zero and the printer initiates the
Auto-Cut immediately.
ê
To reset counter to zero and initiate Auto-Cut
1 Press Setup Menu/Ink OptionMenu/Auto-Cut Menu/Delay Status.
2 Choose Reset Counter.
3 Press OK.