Kodak 4800 - Manual (Page 35)

Printer Options 2-18
Reference Guide
Dryer
The dryer helps to dry ink. When set to Auto, the dryer automatically turns on, samples
the ambient temperature/humidity and calculates the required dryer output temperature.
When set to On, the dryer is at maximum dryer output. Ambient temperature and
humidity are ignored and the dryer is at maximum output for every print job. Choices are
Off, On and Auto. Note: When using the dryer, Auto is the recommended setting. It
reduces energy consumption and reduces the amount of heat generated by the dryer.
CAUTION: Never open the dryer. There are no user serviceable
parts inside. Refer servicing to qualified service personnel only.
CAUTION: This assembly emits heat by radiation.
CAUTION: Once the dryer is plugged in, there is continuous power
to the dryer, even when the printer is turned off.
DISCONNECT POWER CORD BEFORE SERVICING!
ê
To set the dryer
1 Press Setup Menu/Ink Option Menu/Dryer.
2 Choose Auto.
3 Press OK.
LCD Contrast
The LCD Contrast function lets you adjust the brightness of the control panel. The range
is 1-8, where 1 is less contrast. The default is 4. Note that if brightness is set too high,
you may not be able to see the text displayed on the control panel.
ê
To set LCD contrast
1 Press Setup Menu/User Setup Menu/LCD Contrast.
2 Choose the contrast value.
3 Press OK.