Kodak 4800 - Manual (Page 43)

HP-GL/2 options 3-6
Reference Guide
ê
To define nesting wait time
1 Press Setup Menu/HP-GL/2 menu/Nesting Menu.
2 Choose Nest Enable/On.
3 Press OK.
4 On the Nesting menu, choose Nest Time.
5 Choose the Nest Time (30 seconds, 1 minute, 2 minutes).
6 Press OK.
Ink limit
The printer can assign an ink limit to polygon fills and wide vectors. This helps prevent
bleeding when printing on inexpensive inkjet media. The default for this option is On. If
you are using high quality media, this option may not be needed and can be turned off.
ê
To enable the ink limit
1 Press Setup Menu/HP-GL/2 menu/Ink Limit.
2 Choose On.
3 Press OK.
HP-GL/2 Test File
To assist in diagnosing potential problems with your printer, we have placed an HP-GL/2
test file in the printers ROM memory. The colors that print on the test file are the RGB
values for those colors as defined in AutoCAD. Settings for Ink Reduction and Ink
Limiting have no effect on this file. All other printer options such as Number of Passes
and Carriage Speed are available.
ê
To print the test file
1 Press Utility Menu/Service Menu/Test Print.