Kodak 4800 - Manual (Page 40)

HP-GL/2 options 3-3
Reference Guide
ê
To set control
1 Press Setup Menu/HP-GL/2 menu/Control.
2 Choose either Software or Printer.
3 Press OK.
Rotation
The printer automatically prints an image with the long side on the paper axis. To better
fit images and save media, you can use the Rotation option to turn vector files counter-
clockwise 90 degrees at a time. If the rotation specified won't fit on the media or con-
tains raster images, it will not be rotated. When the Rotate value is set to AUTO, the
algorithm will automatically rotate the plot if it determines that the rotation will save
media (regardless of whether Nesting is enabled). If Rotate is set to 0, the plot will not
be rotated. The Control function does not override the RO command in the plot file.
Note: Rotation is supported for HP-GL/2 files only. It is not supported for RTL files.
ê
To rotate the image
1 Press Setup Menu/HP-GL/2 menu/Rotation.
2 Choose the rotation angle (0, 90, 180, 270, auto).
3 Press OK.
Reprints
You can print up to 99 copies of a specific vector file. When Reprint is set to 0, only one
image is printed.
ê
To make multiple prints
1 Press Setup Menu/HP-GL/2 menu/Reprints.
2 Enter the number of reprints (0 to 99).
3 Press OK.