Kenwood AX-7 - Manual (Page 42)

42 EN
Preparations
Basic section
Application section
Knowledge section
Presetting radio stations manually (Manual preset)
1 Perform the procedure in "Tuning in to a
non-preset radio station (Auto tuning,
Manual tuning)" to receive the station to be
preset.
q
2 Press the ENTER key during reception.
(Proceed to step 3 while "- - " is blinking.)
3 Select one of the preset numbers from 1 to 40
with the 4/1 , ¡/¢ key [4 / ¢
key or the numeric keys on the remote].
or
Preset numbers can directly be input with
the Numeric keys on the remote control
unit.
4 Press the ENTER key again.
(Repeat steps 1, 2, 3 and 4 to preset other
stations.)
÷ To memorize an RDS station, wait for the station
name to appear on the display before performing
step 2.
FM L
R MHz
TUNED ST. AUTO
30 10 5 3 1 0(-dB)
1 2 3 4 5
÷ If several stations are preset under the same num-
ber, the previous memory is replaced with the latest
memory contents.
÷ Sequence for pressing the Numeric keys on the re-
mote control unit
To input "12" ..... +10, 2
To input "20" ..... +10, +10, 0
FM L
R MHz
TUNED ST. AUTO
30 10 5 3 1 0(-dB)
1 2 3 4 5
Receiving broadcast station
Up to 40 stations can be memorized.
÷ “COMPLETE” is displayed when input has been
completed.
*5613/39-45/EN 06.1.6, 0:53 PM 42