Kenwood AX-7 - Manual (Page 41)

41 EN
Preparations
Basic section
Application section
Knowledge section
Tuning in to a non-preset radio station (Auto tuning, Manual tuning)
Auto tuning :
The next station can be received automatically every
time the 4/1 / ¡/¢ key [ 1/¡ key] is
pressed.
Manual tuning :
Press the 4/1 / ¡/¢ key [ 1/¡ key] re-
peatedly until the desired station is received. The de-
sired station can also be received by holding the 4/
1 / ¡/¢ key [ 1/¡ key] down until its fre-
quency is displayed.
Each press of the Tuning Mode key [AUTO/MONO
key on the remote] changes the tuning types.
Auto tuning : "AUTO TUNE" is displayed.
The AUTO indicator lights up.
(Stereo reception)
Manual tuning : "MANUAL TUNE" is displayed.
The AUTO indicator goes off.
(Monaural reception)
÷ Normally, use the Auto tuning (stereo reception).
÷ In MANUAL mode, FM stations are received in mon-
aural.
Receiving broadcast station
Select the tuning mode according to the radio
wave receiving condition.
Auto tuning: When the receiving condition
is good.
Manual tuning: When the receiving condition
is poor. (Weak radio waves)
1 Select the tuner input.
2 Press the Tuning Mode key [AUTO/MONO
key on the remote] to select a tuning type of
Auto or Manual.
3 Tune in to a station by pressing the 4/1
, ¡/¢ key [1 / ¡ key on the remote].
To increase
frequency To decrease
frequency
or
or
To increase
frequency To decrease
frequency
MAIN UNIT REMOTE
÷ For tuning from the main unit, perform the operation of
step 2, and perform tuning while the indication
“AUTO TUNE” or “MANUAL TUNE” is shown.
*5613/39-45/EN 06.1.6, 0:53 PM 41