Kenwood AX-7 - Manual (Page 28)

28 EN
Preparations
Basic section
Application section
Knowledge section
Basic use method
TONE / TURN OVER setting
In this unit, TREBLE and BASS sounds can be ad-
justed to your preferences. (TONE)
In addition, frequency characteristics of the
TREBLE and BASS sounds can be adjusted with
the three types of Low, Mid and High. (TURN
OVER)
1 Press the SOUND SELECTOR key, turn the IN-
PUT SEL./MULTI CONTROL knob to select
“TONE”. Then press the SET key. [press the
TONE TURN OVER key on the remote].
÷ TONE/TURN OVER setting is not possible when
D.EQ RecMode is on.
2 Press the MULTI CONTROL @ / # key on the
remote to select a frequency type (Low:
100Hz, Mid: 150Hz, High: 200Hz)
3 Adjust the level of BASS with the INPUT
SEL./MULTI CONTROL knob [MULTI CON-
TROL
% / fi key].
4
Press the SET key to confirm BASS.
Using Digital Sound Equalizer
function
D-BASS Setting
The D-BASS effect can be added according to the
source.
1 Press the SOUND SELECTOR key, turn the
INPUT SEL./MULTI CONTROL knob to se-
lect “D-BASS”. Then press the SET key.
[press the D-BASS key on the remote].
÷ The D-BASS indicator blinks.
2
Turn the INPUT SEL./MULTI CONTROL
knob [press the MULTI CONTROL key on the
remote] to select "Music" or "Movie". Then
press the SET key.
3 Adjust the level with the INPUT SEL./MULTI
CONTROL knob [press the MULTI CONTROL
key on the remote].
÷ The level can be adjusted at the range of 0 - 10.
4
Press the SET key to confirm.
÷ Press the SOUND SELECTOR key to end the
operation or to cancel it.
÷ The D-BASS indicator lights up after the setting
(when the level is 1 or more).
Continued to next page
or
Decrease
the level Increase
the level
or
Increase
the level
Decrease
the level
or
Decrease
the level Increase
the level
or
Increase
the level
Decrease
the level
The items D-BASS and TONE can be selected only when the V.F.S., CLEAR VOICE, or Stereo (EQ)
is selected when the 3.1 channel system to be sold later is connected.
or
*5613/23-38/EN 06.1.6, 0:53 PM 28