Kodak DCS600 - Manual (Page 90)

5-6
Formatting a PC Card
To prevent formatting the wrong PC Card, there can only be one card in the camera when
you format a card. Format the card using either the quick format or the full format feature.
IMPORTANT:
Quick format, while faster, is not recommended if there is a possibility that there are
defects on the PC Card.
The Recover function only works if a PC Card has been formatted on the camera. Refer
to “Recovering Deleted Images” on page 12-15. (If you format a card using the DCS
Host Software, the Recover function will not work.)
1 Select the Menu icon, then
choose Main Menu from the
dropdown menu. Refer to
“Navigation Techniques” on
page 2-14.
2 Select Card from the Main
menu.
The Card menu appears.
3 Choose Quick Format or Full
Format.
If two cards are in the camera,
you are prompted to remove the
inactive card. For example, if
CARD0 is active, you are
prompted to remove CARD1.
4 Remove the inactive card, then
select Retry.