Kodak DCS600 - Manual (Page 71)

3-9
3
P
ower
If your battery charger does not function as expected, check the following:
✔ The wall adapter is properly connected.
✔ There are no foreign objects lodged in the pockets.
✔ The batteries are inserted so that they properly mate with the connector in the
bottom of the pocket.
☛
No harm will come to your batteries if you leave them in the charger for an extended
period of time.
6 Insert one or two batteries in the
slots in the battery charger.
☛
If you are charging one
battery, you can use either slot.
On average, a battery is charged
in approximately one hour. If
two batteries are inserted, they
are charged simultaneously.
7 Once the green light turns on,
wait four hours, then remove the
battery or batteries from the
charger.
If you don’t wait two hours,
batteries will only be charged to
80% of capacity.
8 Insert a charged battery into the
camera.
9 Close the camera door.
The Battery icon is displayed on
the Back Status LCD panel
when a battery is in the camera,
the camera is turned on, and the
camera is not in PowerSave
mode (page 3-11).
☛
The Battery icon is not
displayed if the AC adapter is
connected.
REAR
SLOW
AUTO
ISO
BKT CUSTOM