Kodak DCS600 - Manual (Page 253)

15-5
15
T
rams
m
itt
ing
Serial Out Mode
When the serial port is in Serial Out mode, your camera sends data to a remotely
connected device.
☛
Serial In and Serial Out modes can work at the same time.
1 Select Serial Out from the Serial
Port menu (page 15-2).
The Serial Out Mode menu
appears.
2 Select your choice (described in
the table below).
The setting is retained until you
change it, or use the Transmit
option (page 15-6). Modem is
selected automatically with this
option.
Menu Choice Action Comments
None No data transmitted
Image Number A text string containing the image
number of the just-captured image
is sent to the connected device.
Modem Reserved for Transmit option
(page 15-6)
Remote Release Remote Release is automatically
selected when you select Remote
Release in the Serial In menu.
Sync Pulse A +3Vdc signal with a duration
identical to the exposure duration
is sent to the connected device.