Kodak DCS600 - Manual (Page 220)

13-15
13
A
d
vanc
ed
1 Position the focus brackets on
the subject and lightly press the
Shutter Release button to start
the autofocus operation.
2 Confirm that the green in-focus
indicator • appears in the
viewfinder.
3 Keeping the Shutter Release
button lightly pressed,
recompose, then fully depress
the Shutter Release button to
capture the image.
You can use Custom Setting #7 to set both exposure and focus to lock
simultaneously when you lightly press the Shutter Release button.
Refer to “Custom Settings” on page 13-32.
You can use Custom Setting #4 to deactivate autofocus and keep the
lens from focusing when you lightly press the Shutter Release button.
In this case, focus can be locked by keeping the AF start button
pressed. Refer to “Custom Settings” on page 13-32.
CUSTOM
CUSTOM