Kodak DCS600 User Manual
Page 234
13-29
13
A
d
vanc
ed
In Single Servo AF with Focus-Priority, the self-timer operates only when the green
in-focus indicator
•
appears in the viewfinder. Once the self-timer starts, the shutter will be
released even if the subject is out of focus at the time of shutter release.
When you select buLb the shutter speed automatically sets to 1/250 second.
3
With all auto exposure modes,
close the eyepiece shutter before
starting the self-timer to prevent
stray light from entering the
viewfinder and affecting the
exposure.
4
Fully depress the Shutter
Release button.
The Self-timer LED starts
blinking and the shutter will be
released after 10 seconds.
During the final two seconds,
the LED stays on, warning you
to get ready to capture the
image.
☛
To cancel the self-timer
operation, turn the Drive
mode/Self-timer selector to
another position.
You can use Custom Setting #16 to change the self-timer duration to
any interval from 2 to 60 seconds. Refer to “Custom Settings” on
page 13-32.
CUSTOM