Kodak DCS600 - Manual (Page 172)

10-15
10
Capturing
Your choices on the Intervalometer screen cause the following screens to appear:
☛
To change settings in these screens, use the same technique described for setting
Display Off Time. Refer to “Setting Display Off Time” on page 4-3.
Intervalometer
Settings
Screen Your Action Result
Timer Count Set the timer
count—1-9999
frames
Default: 10 frames
Specifies the
number of frames to
be captured
Timer Interval Set the timer
interval—1 second
to 23:59:59
(HH:MM:SS)
Default: 10
seconds
Specifies the
interval between
image captures
Timer Delay Set the timer
delay—1 second
to 23:59:59
(HH:MM:SS)
Default: 1 second
Specifies the delay
before onset of the
Intervalometer
function
Timer Enable Select Yes Enables the
Intervalometer
function
Select No
Default: No
Disables the
Intervalometer
function