Kodak DCS600 - Manual (Page 210)

13-5
13
A
d
vanc
ed
The aperture setting is indicated
in the Top Status LCD panel and
viewfinder.
The aperture indication changes
in 1/3 stop increments between
the lens’ maximum and
minimum apertures.
You can also set the aperture by
rotating the lens aperture ring. In
this case, F-- blinks in the
viewfinder and in the Top Status
LCD panel and you can only
confirm the aperture setting
through the aperture direct
readout in the viewfinder.
To select the minimum aperture
with the lens aperture ring, you
must also set the minimum
aperture with the Sub-Command
dial.
4 Look inside the viewfinder.
Compose, and lightly press the
Shutter Release button.
F
N
F
O
O
MODE