Kodak DCS600 - Manual (Page 265)

16-11
16
Camer
a Care
Updating From the PC Card
1 Install the firmware on your computer.
2 Insert a PC Card into the card reader on your computer. Refer to “Using the Card
Reader” on page 14-4.
3 On your computer, copy the firmware file (dcs6xx.bin) to the cards root directory.
4 Insert the card in your camera. Refer to “Inserting/Removing PC Cards” on page 5-3.
5 Select the Menu icon, then choose Main Menu from the dropdown menu (page 2-14).
6 Select Firmware from the Main menu.
IMPORTANT:
Place the firmware file in the root directory. It will not work if placed in a folder.
7 The Firmware screen appears.
8 Select Version or Update from
card.
If you choose Version, the
version number of the camera
firmware appears.
If you choose Update from card,
a second screen appears.
9 Choose OK or Cancel.
If you choose Cancel, the
firmware will not be updated.
The process takes approximately
15 seconds.