Kodak DCS600 - Manual (Page 34)

2-9
2
Y
our Camer
a
Navigate Switch
The Navigate switch is a four-way rocker switch located on the back of the camera. It is
accessible whether you are holding the camera horizontally or vertically.
Using the Navigate switch to Navigate the Image LCD Panel
The Navigate switch operates in the following manner when you use it with the Display or
Selector buttons (described on the next page):
✔ Navigate through images displayed on the Image LCD panel by pressing and
holding the Selector button and pressing the top, bottom, right, or left side of the
switch. Refer to “Image LCD Panel” on page 2-12.
✔ Navigate up or down through vertically arranged menu options by pressing and
holding the Selector button and pressing the top or the bottom of the switch.
✔ Navigate across the menu bar or through horizontally arranged menu options by
pressing and holding the Display button and pressing the right or left side of the
switch.
Using the Navigate switch to Select the Focus Area
When you use the Navigate switch without the Display or Selector buttons, you can select
the desired focus area. Refer to “Selecting the Focus Area” on page 9-1.
☛
If you select Dynamic AF’s primary sensor or the single AF sensor, you can prevent
accidental change by using the Navigate switch with the Focus Area Lock button.
ISO
BKT CSM L
Navigate Switch
Display button
Selector button
Record/Tag button
White Balance button