Confirming stored dtmf numbers, Transmitting stored dtmf numbers – Kenwood TM-V7E User Manual
Page 66
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
60
CONFIRMING STORED DTMF NUMBERS
1 Press [MNU] to enter Menu mode.
2 Select Menu No. 7 (DTMF Memory).
3 Press [
s
s
s
s
s
]
.
•
The memory channel operated last appears.
4 Press Mic [0] to [9] to select the desired channel.
5 Press [MNU] to exit Menu mode.
TRANSMITTING STORED DTMF NUMBERS
To transmit a stored DTMF number, follow the procedure
below.
1 Press Mic [PTT] + [PF].
•
The display for selecting a DTMF memory channel
appears.
2 Press Mic [0] to [9] to select the desired channel.
•
The number stored in the channel scrolls across the
display accompanied by DTMF tones from the speaker.
•
After the transmission, the frequency display is restored.
•
If a memory channel that does not contain DTMF numbers
is selected, an error beep sounds.
Note:
If the control band differs from the TX band, you cannot transmit
stored DTMF numbers.
VOL SQL
CALL
VOL SQL
CALL