Kenwood TM-V7E - Manual (Page 30)

24
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
■ Selecting Offset Frequency
Select how much the transmit frequency will be offset
from the receive frequency.
1 Select the desired band.
2 Press [MNU] to enter Menu mode.
3 Select Menu No. 5 (Repeater).
4 Press [ s s s s s ] , then select Item No. 2 (VHF Offset or
UHF Offset).
• The current offset frequency appears.
6 Press [SET] again to complete the setting.
7 Press [MNU] again to exit Menu mode.
TM-7VE only: If you have selected " " for the offset direction, you
cannot change the default (7.6 MHz).
Note: After changing the offset frequency, the new offset frequency
will also be used by Automatic Repeater Offset.
■ Activating Tone Function
Press [TONE] to activate the Tone function.
• Each time you press [TONE], the selection changes as
shown below.
No Indicator Tone CTCSS
("T") ("CT")
5 Press [SET], then select the appropriate offset
frequency.
• The selectable range is from 00.00 MHz to 29.95 MHz
in steps of 50 kHz.
VOL SQL
CALL
2
VOL SQL
CALL
1
2
VOL SQL
CALL CALL
1
2