Kenwood TM-V7E - Manual (Page 65)

59
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
4 Press a numeric key 0 to 9 on the Mic keypad to select
the desired channel.
5 Press [SET].
• The display for entering a DTMF number appears.
6 Use the keypad to enter the digits of the number to be
stored.
• The corresponding DTMF tones are heard.
• If you enter an incorrect digit, press [VFO] to erase all
digits entered.
7 Press [SET] to complete setting.
• The entered DTMF number appears with the channel
number.
8 Press [MNU] to exit Menu mode.
STORING DTMF NUMBERS FOR AUTOMATIC DIALER
To store a DTMF number with a maximum of 16 digits in
any of 10 dedicated DTMF memory channels, follow the
procedure below.
Note:
◆ Audible DTMF tones from other transceivers near you may be picked
up by your MC-53DM or MC-45 microphone. If so, this could prevent
the function from working correctly.
◆ DTSS or Page does not function while you are storing a DTMF
number even if a DTSS or Page code is received that matches one
already stored in memory.
1 Press [MNU] to enter Menu mode.
2 Select Menu No. 7 (DTMF Memory).
3 Press [ s s s s s ] .
• The memory channel operated last appears.
VOL SQL
CALL CALL
VOL SQL
CALL CALL
VOL SQL
CALL CALL