Kodak PROFESSIONAL LED II 20P User Manual
Page 25
Using the System
September 2000
2-5
The Send LUT to Printer screen appears.
NOTE: The highlighted LUT in the dialog box above is the most recent
calibration LUT.
5. Click
either
Load Selected LUT or Load Custom LUT (or Cancel to cancel
the calibration process).
If you click Load Selected LUT, the system automatically downloads the
highlighted LUT to the printer to create a test print.
When the test print has been sent, the Scanning Processed Print with
Densitometer status icon on the LED Printer Calibration screen highlights.
Go to “Obtaining Densities” on page 2-6.
6. If
you
selected
Load Custom LUT in step 5, the Open dialog box appears.
Select or type the name of the LUT file you want and click Open.