Kodak PROFESSIONAL LED II 20P - Manual (Page 169)

September 2000 D-1
Appendix D: Using the Image Print
Server Software
This section describes how to use the KODAK PROFESSIONAL Image Print
Server Software for WINDOWS NT Workstation 4.0 Systems with the KODAK
PROFESSIONAL LED II Printer 20P (20P Printer) and the KODAK
PROFESSIONAL LED II Printer 20R (20R Printer).
The IPS Software enables printing of TIFF images and provides easy, intuitive
methods for performing simple print management operations that include:
• stopping/suspending and resuming the processing
• deleting images from the queue
• inserting new images into the queue
• applying a tone scale correction to images
In addition, IPS Software allows you to monitor a specified file system or folder
while waiting for TIFF images.
Communication Channels
Your computer can print to the 20P or 20R Printer through a SCSI connection
only.
Installing the IPS Software
You must be familiar with the WINDOWS System in order to perform the
installation.
Hardware Requirements
The following is the minimum hardware required for the IPS Software:
• 64 MB Main System Memory
• 100 MHz PENTIUM Processor
• VGA Monitor (640 x 480 spatial resolution)
Software Requirements
The following must be installed on your computer:
• WINDOWS NT Workstation 4.0
• An ASPI-compliant SCSI interface driver